Online Payment System

Home > Tools
Choose a sub category:
Staplers Generators Pumps
Hammer Tackers Knives, Blades and Tool Pouches Stilts
Tool Belts & Pouches Utility Knives

Insulation Installation Equipment & Tools

Sort By:
Page of 1
10 Replacement Blades for Vintool 100 Blade Dispenser
Our Price: $3.95
Our Price: $11.50
10 Replacement Blades for Vintool 100 Blade Dispenser

This heavy duty fiberglass batt knife cuts batts, foamboard and drywall. The knife comes two extra 4” scraper blades. The extra blade storage is in the one-piece handle.

These heavy duty utility blades are made of .025 thick high carbon surgical grade steel and double honed to provide an ultra keen edge. Fits many utility knives and are for cutting drywall, fiberglass, wood, plastic, cardboard and more. 100 blades per box. The utility blade safety dispenser is plastic and dispenses any heavy duty utility blade. Used blade storage compartment. May be conveniently hung on wall or carried. It includes 100 blades.

14" x 22" Stilts 15,000 Watt Generac Generator - Call For Freight
Our Price: $235.00
Our Price: $2,850.00
14" x 22" Stilts 15,000 Watt Generac Generator - Call For Freight

These adjustable height stilts are the top of the line from the Dura-Stilt Corporation. Spring tension individually adjustable for natural leg movement to give exactly the right “feel”. Telescoping legs slide smoothly for quick and easy adjustment without tools. Includes strap-on shoe adaptors.

The GN-150 Generac provides 15,000 running watts, 22,500 surge watts. It features a Generac OHM Engine, full pressure lubrication, automotive style spin-on oil filter, extended engine life-rated 3,000+ hours, and an electronic govenor for sensitive electronics. It also features a large 16 gallon fuel capacity tank, EPA/CARB certified, battery/wheel/electric start(standard), and a 2 year limited warranty.

18" x 30" Stilts 24" x 40" Stilts
Our Price: $245.00
Our Price: $255.00
18" x 30" Stilts 24" x 40" Stilts

These adjustable height stilts are the top of the line from the Dura-Stilt Corporation. Spring tension individually adjustable for natural leg movement to give exactly the right “feel”. Telescoping legs slide smoothly for quick and easy adjustment without tools. Includes strap-on shoe adaptors.

These adjustable height stilts are the top of the line from the Dura-Stilt Corporation. Spring tension individually adjustable for natural leg movement to give exactly the right “feel”. Telescoping legs slide smoothly for quick and easy adjustment without tools. Includes strap-on shoe adaptors.

6" Batt Knife 8" Batt Knife
Our Price: $8.95
Our Price: $8.95
6" Batt Knife 8" Batt Knife

These square batt knives are made of 16 guage steel. Excellent for cutting think batts and rockwool. Sheaths for both the 6” & 8”. Accu Sharp blade sharpener is great for these or any other knives.

These square batt knives are made of 16 guage steel. Excellent for cutting think batts and rockwool. Sheaths for both the 6” & 8”. Accu Sharp blade sharpener is great for these or any other knives.

Accu Sharp Knife Sharpener Adjustable Stilts 15" x 23"
Our Price: $6.95
Our Price: $215.00
Accu Sharp Knife Sharpener Adjustable Stilts 15" x 23"

For use on UK-600 and UK-800 knives

Adjustable and lightweight yellow magnesium stilts. Parts are available.

Adjustable Stilts 18" x 30" Adjustable Stilts 24" x 40"
Our Price: $220.00
Our Price: $230.00
Adjustable Stilts 18" x 30" Adjustable Stilts 24" x 40"

Adjustable and lightweight yellow magnesium stilts. Parts are available.

Adjustable and lightweight yellow magnesium stilts. Parts are available.

Duo-Fast HT 550 Tacker H30-6 Bostitch Hammer Tacker, Hand Held
Our Price: $61.95
Our Price: $25.95
Duo-Fast HT 550 Tacker H30-6 Bostitch Hammer Tacker, Hand Held

The hammer tacker is the fastest, manually operated staple tacker with all steel construction and a comfortable hand grip. It features a Jiffy Jaw, easy back end loading and engineered balance. It holds a double load of staples. Takes staples up to 5/16".

This Bostitch hammer tacker is designed for quick and repetitive stapling. It has a powerful yet compact design, and staples load quickly so you can get back to work.

H30-8 Bostitch Hammer Tacker, Hand Held Heavy Duty Fixed Blade Knife
Our Price: $25.95
Our Price: $2.50
H30-8 Bostitch Hammer Tacker, Hand Held Heavy Duty Fixed Blade Knife

This popular Bostitch hammer tacker is designed for quick and repetitive stapling. Lightweight construction makes for easy, one-handed operation.

These utility knives are all metal construction, rugged and heavy duty.

Josef Kihlberg 670 Pnuematic Stapler Josef Kihlberg 680 Pnuematic Stapler
Our Price: $369.95
Our Price: $368.95
Josef Kihlberg 670 Pnuematic Stapler Josef Kihlberg 680 Pnuematic Stapler

These are used for applying netting and fabrics. Much quicker and will save you time on all jobs over hand tackers. Shoots up to 1700 staples per minute. Lightweight, easy to adjust and the double length magazine provides large load capacity.

These are used for applying netting and fabrics. This stapler will take a heavier gauge 1/2" crown staple. Much quicker and will save you time on all jobs over hand tackers. Shoots up to 1700 staples per minute. Lightweight, easy to adjust and the double length magazine provides large load capacity.

Leather Belt Pump, wall spray
Our Price: $11.50
Our Price: $1,550.00
Leather Belt Pump, wall spray

The “Insulators Tool Pouch” is a leather pouch with a divider inside and a utility knife holder on the front. The 5-pocket suede tool pouch will hold a hammer, stapler, nails, utility knife, pencils and more. The 11-pocket carpenter apron has an adjustable belt with 2 front nail pockets, 2 large pouches, 6 small tool pockets, 2 hammer holders and a tape pocket. The web belt is 2 1/4” wide with government specified hardware. It adjusts to a 48” waist. The leather belt adjusts up to a 46” waist and is 1 1/4” wide.

Portable, lightweight, 1 hp direct drive diaphragm pump with pressure regulator. Maximum pressure 275 psi. Maximum flow 4.4 gpm. Power -115V/60 Hz

Rapid 11 Ergo Hammer Tacker Rapid 11 Hammer Tacker
Our Price: $31.58
Our Price: $31.95
Rapid 11 Ergo Hammer Tacker Rapid 11 Hammer Tacker

Professional, easy-to-use hammer tacker for stapling fitted carpets, insulation material, roof paper, labels etc. Single-handed ergonomic grip for easy operation. - For flat wire staples 6 - 10 mm - Only four parts - simple and durable. -Ergonomically designed rubber grip. - Four-way grip - Spare parts available.

A durable stapler for tacking or light nailing. Uses 1/4”, 3/8” or 5/16” staples.

Rapid 19 Ergo Hammer Tacker Rapid 19 Hammer Tacker
Our Price: $23.99
Our Price: $19.95
Rapid 19 Ergo Hammer Tacker Rapid 19 Hammer Tacker

This popular tool is designed for quick and repetitive stapling. Powerful yet lightweight, it is ideal for one-handed operation. It is also highly reliable and durable, with no loose parts.

A disposable hammer stapler. Uses 1/4” staples.

Replacement Blades 100 (20 - 5 pks) Retractable Blade Knife
Our Price: $9.50
Our Price: $3.25
Replacement Blades 100 (20 - 5 pks) Retractable Blade Knife

These heavy duty utility blades are made of .025 thick high carbon surgical grade steel and double honed to provide an ultra keen edge. Fits many utility knives and are for cutting drywall, fiberglass, wood, plastic, cardboard and more. 100 blades per box. The utility blade safety dispenser is plastic and dispenses any heavy duty utility blade. Used blade storage compartment. May be conveniently hung on wall or carried. Includes 100 blades.

These utility knives are all metal construction, rugged and heavy duty.

Sheath for 6" Knife Sheath for 8" Knife
Our Price: $6.95
Our Price: $6.95
Sheath for 6" Knife Sheath for 8" Knife

Sheath for UK-600

Sheath for UK-800

The Insulators Tool Pouch Vintool Knife
Our Price: $17.95
Our Price: $21.95
The Insulators Tool Pouch Vintool Knife
The “Insulators Tool Pouch” is a leather pouch with a divider inside and a utility knife holder on the front.
The web belt is 2 1/4” wide with government specified hardware. It adjusts to a 48” waist. The leather belt adjusts up to a 46” waist and is 1 1/4” wide. Sold separately.

This heavy duty fiberglass batt knife cuts batts, foamboard and drywall. The knife comes two extra 4” scraper blades. The extra blade storage is in the one-piece handle. Includes sheath.

Wall Spray System - CALL FOR FREIGHT Web Belt
Our Price: $1,950.00
Our Price: $7.50
Wall Spray System -  CALL FOR FREIGHT Web Belt

Portable, lightweight, diaphragm pump, suction line, bypass line, 100' of liquid line and your choice of spray nozzle.

The “Insulators Tool Pouch” is a leather pouch with a divider inside and a utility knife holder on the front. The 5-pocket suede tool pouch will hold a hammer, stapler, nails, utility knife, pencils and more. The 11-pocket carpenter apron has an adjustable belt with 2 front nail pockets, 2 large pouches, 6 small tool pockets, 2 hammer holders and a tape pocket. The web belt is 2 1/4” wide with government specified hardware. It adjusts to a 48” waist. The leather belt adjusts up to a 46” waist and is 1 1/4” wide.