9400 Model Insulation Blower
|
|
9400-Super Insulation Blower. With Dual Blowers!
|
|
|
|
|
9400 Model Machine (single blower)
FREE SHIPPING!* *Lower 48 states only. For limited time. The Accu1 9400 is a portable, all fiber, blowing and spraying machine, engineered with the busy contractor in mind. The variable speed blower and adjustable material feed provide powerful, efficient operation with maximum production from a 115-volt machine. Durable construction and corrosion resistant coating provide long life with minimal maintenance.
Production Rates
- Cellulose: 2,500 lbs/hr
- Fiberglass: 900 lbs/hr
- Rockwool: 1,400 lbs/hr
Specifications
- Weight: 390 lbs
- Dimensions: 26" W x 38" D x 48" H
- Hopper Capacity: 14 cu. ft
- Airlock: 10" L x 10" diameter
- Blower Size: Single 12.9 A/3-stage - standard (Double Blower configuration available)
- Power requirements: Dual input, 15 amp/1115V/60 Hz (230V/50Hz, CE configuration available)
- Hose: 3" diameter
Features
- Modular component design
- Welded steel construction with powder coated finish
- Hopper guards
- Recessed control panel
- 1.5 hp TEFC drive motor
- Material conditioning card system and Variable Speed Agitator
- Limited moving parts
- Volt-meter
- Circuit Breaker protection
- Emergency Stop
- Control Panel Override Switch
Benefits
- Quick part replacement and routine maintenance
- Resists damage and corrosion
- Operator safety
- Avoids unintended power shutdowns
- Processes the toughest blowing materials
- Optimum control of conditioning fibers
- Reduced frequency of breakdowns and downtime
- Monitors machine operation
- Helps prevent motor damage
- Operator safety
- Continued Machine operation if remote fails
|
9400 Model Machine (dual blowers)
FREE SHIPPING!* *Lower 48 states only. For a limited time.
9400-Super Insulation Blower. With Dual Blowers!
The Accu1 9400 is a portable, all fiber, blowing and spraying machine, engineered with the busy contractor in mind. The variable speed blower and adjustable material feed provide powerful, efficient operation with maximum production from a 115-volt machine. Durable construction and corrosion resistant coating provide long life with minimal maintenance.
Production Rates
- Cellulose: 2,900 lbs/hr
- Fiberglass: 1,000 lbs/hr
- Rockwool: 1,500 lbs/hr
Specifications
- Weight: 390 lbs
- Dimensions: 26" W x 38" D x 48" H
- Hopper Capacity: 14 cu. ft
- Airlock: 10" L x 10" diameter
- Blower Size: Single 12.9 A/3-stage - standard (Double Blower configuration available)
- Power requirements: Dual input, 15 amp/1115V/60 Hz (230V/50Hz, CE configuration available)
- Hose: 3" diameter
Features
- Modular component design
- Welded steel construction with powder coated finish
- Hopper guards
- Recessed control panel
- 1.5 hp TEFC drive motor
- Material conditioning card system and Variable Speed Agitator
- Limited moving parts
- Volt-meter
- Circuit Breaker protection
- Emergency Stop
- Control Panel Override Switch
Benefits
- Quick part replacement and routine maintenance
- Resists damage and corrosion
- Operator safety
- Avoids unintended power shutdowns
- Processes the toughest blowing materials
- Optimum control of conditioning fibers
- Reduced frequency of breakdowns and downtime
- Monitors machine operation
- Helps prevent motor damage
- Operator safety
- Continued Machine operation if remote fails
|
|
9700 Series
|
|
9800 Series
|
|
|
|
|
5 Year warranty! The Accu1 9700 is a newly designed portable all fiber blowing machine. It utilizes a heavy-duty steel gauge auger that can cut through and provide superior agitation for any type of material. Its horizontal feed and circular conditioning create a continual flow of material with no jamming. With a 12" airlock and adjustable material feed, it can handle any type of application. The 9700 comes standard with dual high velocity blowers. The safety cage top with hinged opening makes filling the hopper a safe and easy process.
Production RatesCellulose: 3,000 lbs/hr Fiberglass: 1,200 lbs/hr Rockwool: 1,600 lbs/hr
Specifications - Weight: 525 lbs
- Dimensions: 26"W x 38"L x 44"H
- Airlock: 12"
- Blower Size: Dual High Velocity Blowers
- 3" outlet port
- Hopper Capacity: 12 cubic feet
Features - Modular component design
- Welded steel construction with powder coat finish
- Hinged, grated hopper guard top
- 1.5 hp, single phase, farm duty drive motor.
|
5 Year warranty! The Accu1 9800 is a portable, all fiber, blowing machine. It utilizes a heavy-duty steel gauge auger that can cut through and provide superior agitation for any type of material. It's horizontal feed and circular conditioning create a continual flow of material with no jamming. With a 14" airlock and adjustable material feed, it can handle any type of application. By incorporating side door access and slide out airlock, servicing the 9800 is easy and effecient. The 9800 comes standard with dual variable speed high velocity blowers. The safety cage top with hinged opening makes filling the hopper a safe and easy process.
Production RatesCellulose: 3,300 lbs/hr Fiberglass: 1,400 lbs/hr Rockwool: 1,800 lbs/hr
Specifications - Weight: 650 lbs
- Dimensions: 26"W x 48"L x 44"H
- Airlock: 14"
- Blower Size: Dual High Velocity
- 3" outlet port
- Hopper Capacity: 15 cubic feet
Features - Modular component design
- Slide out airlock
- Side door access
- Welded steel construction with powder coat finish
- Hinged, grated hopper guard top
- 1.5 hp single phase, farm duty drive motor
|
|
Accu1 9118
|
|
Accu1 9218
|
|
|
|
|
Accu1 9118 - Insulation Blowing Machine
Rugged, powerful, and portable, the 9118 all-fiber blowing machine was designed with the "do-it-yourself" user in mind. The Accu1 9118 is constructed with standardized parts and is the lightest, most maneuverable blowing machine we offer.
Production Rates - Cellulose: 750 lbs/hr.
- Fiberglass: 100 lbs/hr.
- Rockwool: 200 lbs/hr.
Specifications
- Weight: 165 lbs
- Dimensions: 20"W x 24"D x 36"h
- Airlock: 18" long x 6" diameter
- Blower size: 8.6 amp/2-stag
- Hopper copacity: 5 cu.ft
- Power requirements: (1) input, 15 amp
Features
- Modular component design
- Welded steel construction with powder coated finish
- Hopper guards
- Recessed control panel
- Limited moving parts
- Variable speed blower control available
Benefits
- Quick repairs and maintenance
- Resists damage and corrosion
- Operator safety
- Avoids unintended power shut downs
- Reduced frequency of breakdowns and downtime
|
Accu1 9218-M Insulation Blowing Machine
Rugged, powerful and portable, the Accu1 9218 all-fiber blowing machine can be used for both loose fill and spray-on applications. Designed for versatility and economical operation with the professional contractor in mind. The Accu1 9218 is constructed with standardized parts and has the best production of all 115 volt machines in its class.
Production Rates
- Cellulose: 1,400 lbs/hr.
- Fiberglass: 400 lbs/hr.
- Rockwool: 800 lbs/hr.
Specifications
- Weight: 175 lbs
- Dimensions: 20"W x 24"D x 48"
- Airlock: 18" long x 6" diameter
- Blower Sizes: 12.9 amp/3-stag
- Hopper capacity: 8 cu.ft
- Power requirements: Dual input, 15 amp/115V (20 amp/230V/50Hz, CE compliant models available
- Hose: 2.5" diameter
- Remote and 100' remote cord standard
Features
- Modular component design
- Welded steel construction with powder coated finish
- Hopper guards
- 1.5 hp TEFC drive motor
- Agitator/shredder system
- Recessed control panel
- Limited moving parts
Benefits
- Quick repairs and maintenance
- Resists damage and corrosion
- Operator safety
- Processes the toughest blowing materials
- Allows for greater conditioning of fibers
- Avoids unintended power shut downs
- Reduces frequency of breakdowns and down time
|
|
Accu1 9218 AU
|
|
Accu1 9218 CE
|
|
|
|
|
Accu1 9218 AU Insulation Blowing Machine
Rugged, powerful and portable, the Accu1 9218 AU all-fiber blowing machine can be used for both loose fill and spray-on applications. Designed for versatility and economical operation with the professional contractor in mind. The Accu1 9218 AU is constructed with standardized parts and has the best production of all 230 volt machines in its’ class.
Features
- Modular component design
- Welded steel construction with powder coated finish
- Hopper guards
- 1 hp TEFC drive motor
- Agitator/shredder system
- Recessed control panel
- Limited moving parts
Benefits
- Quick repairs and maintenance
- Resists damage and corrosion
- Operator safety
- Processes the toughest blowing materials
- Allows for greater conditioning of fibers
- Avoids unintended power shut downs
- Reduces frequency of breakdowns and down time
|
Accu1 9218 CE - Insulation Blowing Machine
Rugged, powerful and portable, the Accu1 9218 CE all-fiber blowing machine can be used for both loose fill and spray-on applications. Designed for versatility and economical operation with the professional contractor in mind. The Accu1 9218 CE is constructed with standardized parts and has the best production of all a 230V, CE compliant machines.
Features
- Modular component design
- Welded steel construction with powder coated finish
- Hopper guards
- 1 hp TEFC drive motor
- Agitator/shredder system
- Recessed control panel
- Limited moving parts
Benefits
- Quick repairs and maintenance
- Resists damage and corrosion
- Operator safety
- Processes the toughest blowing materials
- Allows for greater conditioning of fibers
- Avoids unintended power shut downs
- Reduces frequency of breakdowns and down time
|
|
Accu1 9300 Model
|
|
Accu1 9300-M
|
|
|
|
|
Accu1 9300 - Insulation Blowing Machine
The Accu1 9300 is a portable, all fiber, blowing and spraying machine, engineered with the busy contractor in mind. The variable speed blower and adjustable material feed provide powerful, efficient operation with maximum production from a 115-volt machine. Durable construction and corrosion resistant coating provide long life with minimal maintenance.
Production Rates
- Cellulose: 2,800 lbs/hr
- Fiberglass: 1,000 lbs/hr
- Rockwool: 1,600 lbs/hr
Specifications
- Weight: 340 lbs
- Dimensions: 22" W x 28" D x 63" H
- Hopper Capacity: 14 cu. ft.
- Airlock: 7" x 21" diameter
- Blower Size: Single 13.9A Blower motor
- Power requirements: Dual input, 15 amp/115V/60 Hz (230V/50Hz, CE configuration available)
- Hose: 3" diameter
Features
- Modular component design
- Welded steel construction with powder coated finish
- Recessed control panel
- 1.5 hp TEFC drive
- Limited moving parts
- Volt-meter
- Circuit Breaker protection
- Emergency Stop
- Control Panel Override Switch
Benefits
- Quick part replacement and routine maintenance
- Resists damage and corrosion
- Avoids unintended power shut downs
- Processes the toughest blowing materials
- Reduced frequency of breakdowns and downtime
- Helps monitor machine operation
- Protects electrical components
- Operator safety
- Ability to finish jobs if components fails
|
Accu1 9300-M Insulation Blowing Machine
The Accu1 9300 is a portable, all fiber, blowing and spraying machine, engineered with the busy contractor in mind. The variable speed blower and adjustable material feed provide powerful, efficient operation with maximum production from a 115-volt machine. Durable construction and corrosion resistant coating provide long life with minimal maintenance.
Features
- Modular component design
- Welded steel construction with powder coated finish
- Recessed control panel
- 1.5 hp TEFC drive motor
- Limited moving parts
- Volt-meter
- Circuit Breaker protection
- Emergency Stop
- Control Panel Override Switch
Benefits
- Quick part replacement and routine maintenance
- Resists damage and corrosion
- Avoids unintended power shut downs
- Processes the toughest blowing materials
- Reduces frequency of breakdowns
- Monitors machine operation
- Protection of electrical components
- Operator safety
- Complete jobs if remote fails
|
|
Accu1 9300-M-CE
|
|
Accu1 9500
|
|
|
|
|
Accu1 9300-M-CE Insulation Blowing Machine
The Accu1 9300 CE is a portable, all fiber, blowing and spraying machine, engineered with the busy contractor in mind. The variable speed blower and adjustable material feed provide powerful, efficient operation with maximum production from a 230 volt, CE compliant machine. Durable construction and corrosion resistant coating provide long life with minimal maintenance.
Features
- Modular component design
- Welded steel construction with powder coated finish
- Recessed control panel
- 1.5 hp TEFC drive motor
- Limited moving parts
- Volt-meter
- Circuit Breaker protection
- Emergency Stop
- Control Panel Override Switch
Benefits
- Quick part replacement and routine maintenance
- Resists damage and corrosion
- Avoids unintended power shut downs
- Processes the toughest blowing materials
- Reduces frequency of breakdowns
- Monitors machine operation
- Protection of electrical components
- Operator safety
- Complete jobs if remote fails
|
Accu1 9500 Insulation Blowing Machine
The Accu1 9500 provides the contractor with the most power and versatility in a portable, multi-story, blowing, spraying and fireproofing machine. Durable construction and corrosion resistant coating provide long life with minimal maintentance.
Production Rates
- Cellulose: 2,750 lbs/hr
- Fiberglass: 1,000 lbs/hr
- Rockwool: 1,550 lbs/hr
Specifications
- Weight: 455 lbs
- Dimensions: 26" W x 38" D x 48" H
- Hopper Capacity: 14 cu. ft.
- Airlock: 10" L x 10" diameter
- Blower Size: dual, 12.9 A/3-stage-standard
- Power Requirements: Single 20A @ 240 VAC
- Hose: 3" diameter
- Volt meter and hour meter included
Features
- Modular component design
- Welded steel construction with powder coated finish
- Hopper guards
- Recessed control panel
- 1.5 hp TEFC drive motor
- Material conditioning card system and Variable Speed Agitator
- Limited moving parts
Benefits
- Quick part replacement and routine maintenance
- Resists damage and corrosion
- Operator safety
- Avoids unintended power shut downs
- Processes the toughest blowing materials
- Optimum control of conditioning fibers
- Reduced frequency of breakdowns and downtime
|
|
Bearing Retainer, 1"
|
|
Bearing retainer, 3/4"
|
|
Not Available!
|
|
|
Not Available!
|
|
|
|
Bearing Retainer, 1" - Insulation Blower / Vacuum Parts
Compatible with Accu1 models 9400 and 9500.
|
Bearing retainer, 3/4" - Insulation Blower / Vacuum Parts
Bearing retainer, 3/4 ", for Accu1 models 9118 and 9218.
|
|
Bearing, 1", Accu1 9400 / 9500
|
|
Belt, Accu1 9218
|
|
Not Available!
|
|
|
|
|
Bearing, 1", Accu1 9400 / 9500 - Insulation Blower / Vacuum Parts
1" sealed bearing for use on Accu1 models 9400 & 9500
|
Belt, Accu1 9218 - Insulation Blower / Vacuum Parts
Drive belt for agitator on Accu1 model 9218.
|
|
Belt, Accu1 9400 & 9500
|
|
Belt, Accu1 9600 (Agitator)
|
|
|
|
|
Belt, Accu1 9400 & 9500 - Insulation Blower / Vacuum Parts
Drive belt for agitator on Accu1 models 9400 & 9500. For use with 16" belt pulley.
|
Belt, Accu1 9600 (Agitator) - Insulation Blower / Vacuum Parts
Drive belt for agitator on Accu1 model 9600.
|
|
Motor, agitator, 1.5 Hp, 115V / 60 Hz for 9218,9300,9400
|
|
Motor, blower, 2-stage, 115V, 50/60 Hz
|
|
|
|
|
Motor, agitator, 1.5 Hp, 115V / 60 Hz for 9218,9300,9400 - Insulation Blower/ Vacuum Parts
Agitator motor for Accu1 9218,9300,9400, 1.5 Hp, 115V / 60 Hz. Styles and color may vary.
|
Motor, blower, 2-stage, 115V, 50/60 Hz - Insulation Blower / Vacuum Parts
Blower motor for Accu1 machines, 2 stage, 115 V, 50 / 60 Hz.
|
|
Relay, closed, 30 AMP, 24 VAC
|
|
Relay, open, 30 AMP, 24 VAC
|
|
Not Available!
|
|
|
|
|
Relay, closed, 30 AMP, 24 VAC - Insulation Blower / Vacuum Parts
Closed relay for Accu1 machines, DPDT, 30A 120/277 VAC, 24 VAC coil. Color may vary.
|
Relay, open, 30 AMP, 24 VAC - Insulation Blower / Vacuum Parts
Open relay for Accu1 machines, DPDT, 30A 120/277 VAC, 24 VAC coil. Color may vary.
|
|
Remote, 2 - position
|
|
Remote, 3-position
|
|
|
|
|
Remote, 2 - position - Insulation Blower / Vacuum Parts
Two position remote, Air / Material, OFF for use on all Accu1 insulation blowers wire for 2 - way operation.
|
Remote, 3-position - Insulation Blower / Vacuum Parts
Three position remote, Air / Material, Air, OFF for use on all Accu1 insulation blowers.
|
|
Transformer, 120 V / 24 V
|
|
Transformer, 240 V / 24 V
|
|
|
|
|
Transformer, 120V primary, 24V Secondary. Styles may vary.
|
Transformer, 240V primary, 24V Secondary. Styles may vary.
|
|
Yellow Jacket Pro RF Remote for Accu1 Machines
|
|
|
|
|
Yellow Jacket Pro RF Remote for Accu1 Machines - Insulation Blower / Vacuum Parts
Over 3500 Insulation professionals use remote controls from Nichols Electronics, Inc.
Highly regarded by the industry, Nichols’s Remotes are Reli-able, Durable and Easy to Use. They let you “Cut the Cord†with a Powerful yet Economical Wireless Remote that “Just Plain Worksâ€. With thousands of remotes in service, on many different makes/models of machines (Intec, Krendl, Insul-Maxx, Meyer, Capitol and Sprayco just to name a few), Nich-ols’s remotes are there to make your insulation jobs easier, safer and more efficient.
Yellow Jacket Pro Kit The YJ Kit includes:
- 3 button 300’ range transmitter w/ Rubber-Tuff™ holster
- Control/Logic receiver unit in NEMA 2X ABS plastic box
- High-gain X-10D extended range antenna with magnetic base
- 9V NiMH battery (2) with charger
- 7-pin adapter for Accu1 equipment
Transmitter
|
Size:
|
7.00 x 3.00 x 1.50 inches
|
RF Range:
|
Up to 500 feet
|
Temp. Range:
|
-30 to +70 Degrees C
|
Battery Life:
|
100+ hours on single charge
|
Antenna:
|
Internal PCB or Whip
|
Controls:
|
1-5 pushbuttons
|
Power:
|
9V or AA standard or rechargeable
|
|
Control Box
|
Size:
|
5.75 x 3.00 x 1.75 inches
|
Power:
|
+12VDC or 120VAC
|
Antenna:
|
Magnet mount whip 1/4 wave
|
Output:
|
1-4 Form C (N.O./N.C.) @ 10Amp
|
Fuses:
|
Power, all relays, built-in tester, 10Amp slowblow
|
Type:
|
ABS plastic, NEMA 2 or greater
|
|
|